Search results


  1. EK9 Matt

    Accord Type R brake setup

    Hi guys, up for sale is my ATR brake setup. This setup has served me well over the last 3 years with no issues stopping the car at all! The calipers were bought from Rmotion so were in good condition and still are, no rips in the boots and pistons all free. Inside the calipers are what's left...
  2. EK9 Matt

    Rota Circuit 10 16" Toyo R888R !SOLD!

    Rota Circuit 10 16x7 5x114.3 ET45. Wheels are in very good condition, have a few stone chips as these have been my track wheels. Come with Toyo R888R tyres on, 225/45 on 2 wheels and 205/45 on the other 2, wider ones were used up front for greater turn in and to get the power down. The 225's...
  3. EK9 Matt

    Enkei RPF1 16x7 5x114.3 ET43 !SOLD!

    FOR SALE Enkei RPF1 16x7 5x114.3 ET43 Wheels are in very good condition with no curbing or marks. Come with Yokohama AD08R tyres all round, two are 215/45/16 and the other two are 205/45/16, ran wider tyres upfront for greater turn in on my EK9. These clear my 300mm ATR brake setup too. Very...
  4. EK9 Matt

    Drag racing Japshow finale 2017

    Here's a link to me and my mate dragging at pod a couple of weekends ago, good video from the guys at Maximum PSI Media!
  5. EK9 Matt

    11.4@123mph

    Hi guys! Went to Japshow finale yesterday and had some drag runs. I put my drag slicks on and gave it my all, my best was an 11.4@123mph, don't think that was bad for a full interior, track setup EK9!
  6. EK9 Matt

    96-98 front lip

    Hi guys! I'm after a front lip for my spare bumper, doesn't have to be a genuine one or even a type r one for that matter, my first choice was a Chargespeed one but absolutely nowhere has them in stock! Just wondered if anyone has anything laying about that they fancy parting with? Regards, Matt.
  7. EK9 Matt

    BC coilovers

    BC Racing, BR series coilovers for sale off my EK9. 12kg front 8kg rear Had these on the car just over 12 months, around 3k miles. They were stripped before fitting and the threads of the shock body were copper slipped up so no seizing, also regularly sprayed with GT85 so in very good...
  8. EK9 Matt

    EK9 Matt feedback

    Please leave feedback here guys. Regards, Matt.
  9. EK9 Matt

    Cusco RS 1/1.5 way LSD VSS gear

    If anyone happens to buy a cusco diff and doesn't get the special VSS gear and drive (like me) that is needed for the Speedo to work then I have found the part number and can confirm it's the correct one. It was purchased from Co-ordsport for £65. Part No: LSD128DGA
  10. EK9 Matt

    Matt's 512bhp EK9 project

    Hi guys, i've finally decided to do a build thread for my car! Well, where to start.........after owning a 1.4 EJ9 for a couple of years i'd finally saved up enough money (when I was 20) to part ex my civic for an EK9, the car I'd wanted since seeing it on Gran Turismo! That was 11 years ago now...
  11. EK9 Matt

    Plate diff oil to use?

    Hi guys, I know this has been covered various times in the past but just wondered what today's take is on what oil+friction modifier to use in a plate lsd. I've purchased a cusco rs diff so just want to get stuff ready for when I install it. Cheers, Matt.
  12. EK9 Matt

    Rear pads

    Hi guys, just after some recommendations on rear pads really, had Dixcel extra speed in last time and I'm ready for new ones now. Using Carbone lorraine RC6 in the front and think they're awesome. Car is mainly used on track but with the odd blast in nice weather or to shows etc. Thanks, Matt.
  13. EK9 Matt

    EK9 turbo tyre blowout coppice, Donington Park

    Last run of the day and the front left let go, good job it wasn't down craner curves! MadM1ke87 on board with me.
  14. EK9 Matt

    Donington Park Turbo EK9

    Hi guys! my latest video from Donington Park. Having a play with my mate in his Exige 360 Cup. hope you enjoy!
  15. EK9 Matt

    Takata harness model range

    Hi guys, I've found some new mph series Takata harnesses for sale and just wondered if that model range is now discontinued as I can't find them for sale anywhere? Ones for sale at the moment are race and drift. Any help much appreciated, Matt.
  16. EK9 Matt

    EK9 Turbo Rockingham

    Hi guys, went to Rockingham at the weekend with the 9, tried a couple of new things out, 1 being a vented bonnet from Fiberworx and 2 being maxsport RB5 tyres. Both new parts worked very well, the bonnet evacuates so much heat it's unreal! The tyres were also good, can't moan for around £300...
  17. EK9 Matt

    Bespoke gearbox for boosted 9

    Hi guys, as a few of you are aware I've recently done a few trackdays in my boosted 9, the problem I have (or think I may have) is at Cadwell I was in 5th at about 7000rpm down park straight. Now this is fine at Cadwell but I fear on a long straight I may run into the 8700rpm limiter. Been...
  18. EK9 Matt

    EK9 Turbo Cadwell Park

    Here's my video from my Cadwell evening session the other day. Trying to catch the fiesta hot hatch cup car lol. Car was perfect, all I did was put more fuel in all night.
  19. EK9 Matt

    EK9 Turbo Blyton Park passenger

    Another video of Blyton, afternoon session with a passenger on low boost.
  20. EK9 Matt

    My EK9 Turbo Blyton park

    Quick little video from my trackday at Blyton park from 21/5/16. First time the cars been run on track with boost so it was a bit of a shakedown. Also had new brakes and suspension so it was a bit of a learning curve. Hope you enjoy guys!
Back
Top