Search results


  1. Luger

    EK9 Steering Rack

    Wanted EK9 steering rack. Thanks
  2. Luger

    Mfactory goodies

    I dont think Mfactory make a 4.6 FD. Its either 4.7 or 4.9. Can you please confirm as i would be interested in a 4.9 FD if that was the case. Thanks
  3. Luger

    K24 injectors in b18c?

    No they are not plug and play. I had to purchase top hats for the injectors so that they could fit the fuel rail and also had to do a little modification but nothing major.
  4. Luger

    K24 injectors in b18c?

    When i did this mod on my b16b i remapped the ECU to have the engine run as it should. Im no tuner but most probably this is the issue you are encountering. To get the most out of this mod best to have a stand alone ECU like hondata or AEM asd get it mapped professionally. Hope this helps.
  5. Luger

    Luger EK4 N/A Build

    Thanks mate :) Been meaning to update this for a few months now but just was too lazy. Finally got some muse to do so and here it goes...... ABS delete done with 40/40 prop valve and new lines. Camber arms in place with 1.5 degrees front and 1 degree at the rear. Cusco subframe...
  6. Luger

    2 Gauge Pod Cluster for EK

    As per title. Looking for a 2 gauge pod that fits in the cluster. Let me know price including postage to Malta. Thanks
  7. Luger

    Ek9 Srs Clock Spring

    Pretty sure ek9 and ak4 clock springs are compatible as I interchanged my broken ek9 clock spring with an ek4 and no problems at all.
  8. Luger

    Camber kits and geo setup for road cars

    I would go for front and rear Yellows camber kits. They are not expensive and good quality as you might know already seeing that you already have Yellows coilovers on the car. Just had mine fitted with these camber arms and set 1.5 front, 0.8 at the rear and loving the feel so far. Its a street...
  9. Luger

    ABS Delete Issue

    So problem seemed to be air in the rear left wheel. Mechanic bled the system with some sort of bleeding machine and now brakes have a much better feel to it. I couldn't test braking power properly since I have just installed front and rear camber arms so need to do alignment and camber settings...
  10. Luger

    K-Tuned Short Shifter

    Seems that the spacing was actually the issue that was making 1st gear grind as you said. All gears engage perfectly now and actually have a sweeter shift feel to it. Thanks once again for the tip :win::win::win:
  11. Luger

    K-Tuned Short Shifter

    Hi B16Swt, Thanks for your input....much appreciated. I will have a closer look at this spacing thing and see if fine tuning this might sort the issue. The weird thing is I can feel that there are no issues as such when putting in 1st gear as the throw feels right and shifter also feels in...
  12. Luger

    K-Tuned Short Shifter

    Just installed a K-Tuned Pro Circuit short shifter. No issues on installation and throws are short just as I wanted them. My only concern is when engaging 1st gear. When putting in 1st gear, I have to use some force, more than normally needed to put in a gear. If i dont do that the gear seems...
  13. Luger

    ABS Delete Issue

    Spoke to the mechanic and said he will bleed the system with some sort of bleeding machine. No idea why he went for Hel braided lines to be honest but seems like race cars over here are built using them instead of hard pipes. Might not gain any benefit but should not affect the performance...
  14. Luger

    ABS Delete Issue

    Thanks for your input Jesse. Will have a word with the mechanic about this. Cheers
  15. Luger

    ABS Delete Issue

    Hi there, Just removed ABS from my EK and now the pedal is very soft and travels far and stopping power is very very weak. I found no brake fluid leakages from prop valve or from the breaded lines near the caliper. The new pipes from the prop valve are not the metal type as OEM so to say but...
  16. Luger

    EK9 Cupholders.

    Too bad mate....he had them for sale for quite some time.....bad timing :(
  17. Luger

    EK9 Cupholders.

    @jesse888 He should have one for sale. Send him a PM mate.
  18. Luger

    B18cr High comp build? Info and Help please :-)

    Asking myself the same thing....
  19. Luger

    Marc's CRX VT

    Love what ur doing with this one! Keep it up! :)
  20. Luger

    Luger EK4 N/A Build

    Thanks mate.....my build looks so boring compared to the other full blown NA k20 build beasts or turbo builds but the car came with pretty much the best breathing mods available and only needed some "minor" improvements even though these improvements cost me quite abit. Not stroking the engine...
Back
Top