Search results

Hi mate, would this fit a facelift EK4 (Jordan) at all? If unsure could you measure the base so I know it'll fill the hole where the current one is, cheers :)

Ah cool, well I work in the parts dept at the Honda dealer by Wickes. My Jordan is lowered, on yellow volks TE37's and is supercharged. I dare say you've probably seen me going about as i'm often going up/down the Stafford Rd and by Fordhouses area :nice:

Welcome to the forum mate, where abouts in Wolves are you? I cant say i've seen any EK9's going round? I have a Civic Jordan btw :)

If it's of any help mate, the part numbers are 71501-S03-Z01ZA for the bumper and 71510-S03-Z00ZA for the lip. Unfortunately the bumper is no longer avaialble to buy from Honda and the lip is currently on back order till the end of August.

As said above mate, depends on what sort of power you want to be running etc.. but the standard B16A2 is fine for boosting. I myself have a civic jordan, supercharged and makes 220whp (260-270bhp) thats on stock internals, have been told the standard engine is safe upto around 300bhp before...

Hi mate, I'm after a drivers side front wheel arch liner (the black plastic one, fits under the wing up to the front bumper) in decent condition please. Mines got a hole in it and has lost all rigity. Tried to PM but your inbox is full. Regards Michael

It's strange that your plugs were dry before and are now wet when trying to fire the car? You'll certainly be flooding the engine if the plugs are wet, clean them up, burn off any excess fuel on them (with a lighter or similar) and give them a rub. I'd also speak to the person who did your...

Cheers Dan, yeah me and my little boy are doing great thanks :nice: He loves coming out in my car :D Hope you're all well up there mate :)

Cheers for all the kind comments guys :) I'll be at South Mimms next weekend if any of you are coming down? Feel free to come and say hi :)

Hi guys, I know i'm not a big poster on here but i'm regularly browsing and like to keep you all up to date with my car :) Here are the final updates to this project...for now at least :naughty: So first off a new clutch, was struggling using the unsprung ACT daily so got hold of myself a new...

Cheers mate, yeah it doesn't hang around. Not the quickest Civic by any means but not bad a stock engine with a blower on it :D As the others have said you'll need to swap the hubs to those off an EK9/DC2 to get the 5 studs required for those (or any) 5 stud wheels. Need to get that grille...

Welcome to the forum mate, that's my sisters Jordan :) I was the guy dropping my supercharged Jordan at R-Motion for some work ;)

Hi Guys I'm after some roll centre adjusters for my Civic Jordan. I was just wondering if there were was any preferance from one brand to another? I've been looking at the Cyberspeeds as I know that the quality of their products seems to get good reviews (recently purchased there front...

No problem at all, i've been an admin on the forum for about 6 months now (and a mod for about a year before that) and I activate all the legit accounts (sure the admin on here probably get plenty of false spam bots try too) but anyway it's sorted now :nice: Hope you enjoy the forum think there...

Hi mate, it's still running and if you're username is b18cjor then I activated your account earlier today when you requested the account :) It's not as active as EK9.org etc.. but then it's a limited run of cars :nice:

Ok guys time for the final piece of the jigsaw as such - the mapping. Here is all the parts that were changed and graphs from the map. OEM rad and fan setup New Koyorad and Spal fan New RC 750cc injectors Hondata 4bar MAP sensor Hondata S300 V2 And now for the...

Here's the next update, got round to fitting a couple of other parts the other weekend that i've had sitting around for ages. First up a push-out cup holder Here's the original setup you're all used to seeing Start ripping the centre console out.... Fully stripped New cup...

Cant believe i've not updated this thread for so long, been rather busy over the past few months. Anyway here's one of a few updates coming up :) Finally got round to fitting my 282mm front brake setup, i've had a couple of problems along the way but i finally got it fitted today on my...

Ok it's not quite done but here is my pre JapShow update... So i've never really been one for badges and decals but someone gave me this so thought why not.. Well what did you think, i'm not one to confuse people so thought i might as well get the kit...

I'll be there with some stand passes :dance: Look forward to catching up with some of the old faces and meeting the new :) Just hope my car is stand worthy :lol: