Search results


  1. stu87

    Squeezing the most power from my h22a

    Im looking some guidance with h22 tuning if yous are willing to give your opinion. Ok my car is a h2b eg6 tunned to 240bhp and 177 torque, my mods at the minute are full 3 inch exhaust with 2 boxes, 1320 mani opened to 3 inch, unopened euro r engine with balance shaft deleted, electric power...
  2. stu87

    My vti-s mb6

    My daily driver 99 vti-s mb6 110k with service history to 90k 3 previous owners I bought the car pretty standard bar having a powerflow catback. The spec now b18c6 engine 105k on it s80 4.7fd fidanza flywheel 98 spec manifold decat dc2 mugen twinloop catback Dc2 airbox Cusco coilovers prelude...
  3. stu87

    dc2 airbox, pipe and filter

    As above, must be clean, will take a spoon filter either.
  4. stu87

    My h2b eg6 sir2 civic/ headgasket blew b18 turbo time

    Have this eg6 a few years now, was near standard when I got it. The spec B18c 1mm oversized ek9 pistons totally rebuilt Toda cam gears Toda timing belt Chipped p30 on a b18 basemap for now, will get it mapped when I get some head work done. Nology leads 98 spec manifold heat...
  5. stu87

    Fujitsubo exhaust system

    After a rm01a may consider others. It's for an eg6 but will take an ek9 system. Must be in decent nick, no welds or bad damage.
  6. stu87

    Anyone in n Ireland insuring an engine conversion?

    Need advise on where to go to get my b18 eg6 sir insured.
  7. stu87

    Ek4 b18c4 conversion tips

    Will be converting my mates Jordan to a b18c4 soon and there's a few things il need to know. Can I use the mb6 ignition barrel, key transponder on the ek? Will the p9k ecu plug straight in or will I need a harness? Also I will have to run a wire in from the ecu to get the iab's going? anyone...
  8. stu87

    16x7.5 et 45 wheels on a 5 stud eg.

    Anyone on here had this size of wheels on a eg? Im thinking that the ek9s should be a similar fit, so has anyone had any problems with rubbing. Will I need to roll arches? I'm thinking of going for 195/40 or 205/40 tyres.
  9. stu87

    Ek4 s4c 4th and 5th in a 4.7fd s80

    As above, does this work or will I need gears from an ek9 or 96 spec box?
  10. stu87

    Ek9 s4c identification

    Bought a civic tonight and its ment to have a ek9 box but has no sticker on it, it has a diff but just need to know what final drive it has, can someone on here tell me what rpm there 9 sits at in 5th gear at 60 mph?
  11. stu87

    Socketed p28 or p30 ecu

    As above, no crazy prices. Pm me with what you have.
  12. stu87

    B18c idle air control valve

    As above, and for any1 that may have 1 that doesn't know what it is, it bolts onto the back of the inlet manifold and has 2 pipes going to it. Pm me or contact me on 07731530832
  13. stu87

    b16 knock sensor

    Knock sensor needed, pm me with what ya have.
  14. stu87

    eg exhaust system 2.25"

    Whats out there? Im after a decent make, pm me with what you have.
  15. stu87

    60mm eg civic exhaust system

    Must be a decent make but nothing stupid loud. Pm with what you have.
  16. stu87

    ek exhaust on a eg

    Anyone know if the centre section of an ek will fit an eg? Iv found a fujitsubo system id like but its of an ek, dont really want to buy it if its not going to fit perfect.
  17. stu87

    Civic Eg/ek Fujitsubo Rm01a Or Spoon N1

    Im after either of these back boxes for my eg6 civic, i may take a full system at the right price. May also consider another decent system but sure contact me with what you have. Call/txt 07731530832 or pm me
  18. stu87

    newbie from N Irealnd

    Well there everyone, im stuart from Enniskillen. Ok i dont own an ek9 or even an ek for that matter, i have an eg civic. I look forward to meeting new people on here and learning more about hondas.
Back
Top