Search results


  1. SPEED-DEMON

    98 spec ITR lights into SiR-G (99)

    As above. Are 98 itr headlights direct plug and play as far as the wiring connection goes? have the ballasts and connectors on the 98 lights...but do i need to re-wire my own block connector???? Any help appreciated
  2. SPEED-DEMON

    Read this if you want to change your final drive!

    Does a shorter FD gurantee better acceleration tho. I have gone against really short geared cars and I am on the stock 4.4 and will pull on them in 3rd and 4th. I am normally coming from half a car behind and end up in front. I think while they upshift and I am still in the lower gear I gain...
  3. SPEED-DEMON

    lug nuts help!

    Mate i have gone thru 2 sets of lugs in 2 years. I would not reccomend them. My most recent set was a set of volk formula nuts. Look the business but got ten months out of them or 5 wheel turn arounds. Aftermarket nuts are made of really soft metal compared to stock nuts. And only the other day...
  4. SPEED-DEMON

    Help wiring the horn, uninstalling aftermarket wheel

    As above guys need help here. I have the teg SiR-G with SRS and 2 years ago a shop fitted an aftermarket steering wheel and hub adapter (boss kit). For the horn to work they used a shoe horn from an early model civic without srs. Now the situation is I bought an ITR SRS wheel tonight, its...
  5. SPEED-DEMON

    Wheel resistance- videos (2),is it normal guys

    As above lads video of my front wheels taken 2 hours ago. Is that sort of resistance normal. Video links below PS the brakes are on the car about 10 months. They were prelude discs and pads and factory reconditioned callipers and were spotless YouTube - ‪Sticking wheel?‬&rlm...
  6. SPEED-DEMON

    steering wheel wobble and hi resistance on wheels thn normal

    Well lads I have had some steering wheel wobble under heavy braking this last while now, the higher the braking speed the worse it is. But was doing a service on the car yesterday and while the front wheels were off the ground I went to spin them to see if they were catching anywhere, but they...
  7. SPEED-DEMON

    b18c ek9 220+bhp

    I was considering getting my car mapped there at tdp few months back but didnt go with it at the last min. There are a few good stories about his maps on track cars and prob 1 or 2 cars in ireland that i know of have good tunes off him and anytime anyone asks about mapping he refers back to...
  8. SPEED-DEMON

    WTF do you guys make of this

    OK guys update here. Paypal has denied the claim. Here is what they had to say: We have completed our investigation of this case. No further action is required by you at this time. We have denied this claim. As stated in our User Agreement, PayPal's Buyer Complaint Policy only applies to the...
  9. SPEED-DEMON

    Low position seat rail

    They are the job alright. I do think though that the stock seating position in the dc2 is a fair bit lower than the ek9/4 with a recaro and rail. I'm sure i look tiny in the integra now with the spoon one as im only 5ft7. But i havent driven it yet as its rebuild time for the unit. But hopefully...
  10. SPEED-DEMON

    WTF do you guys make of this

    Ok guys a quick update on this. I have opened the dispute with paypal resolution center. This should change things a little. I have a copy of all emails sent to me and sent by me to Nengun should they require it. I am not happy with sending back the pulley. That would be the easy way out for...
  11. SPEED-DEMON

    Re-use head gasket?

    Hi guys engine getting a rebuild question is can i reuse my head h gasket as the head was only built 3thousand miles ago or so with the mugen head gasket used. So I am wondering would this peice be ok to use again or should I get another one. If so what are the reccomendations for a new one??
  12. SPEED-DEMON

    WTF do you guys make of this

    I have been in touch with them and they wont budge and are refusing to sort the situation out saying that, if i want another pulley, buy one". The payment was made thru paypal and they have since changed the advert on their site adding on a bit at the end that says "require 2". So what can I do...
  13. SPEED-DEMON

    WTF do you guys make of this

    Guys if you see the advert below, what do you assume your getting a set of cam pulleys for the intake and exhaust, or just the one pulley?? Added a pole to make things easier. I ordered this off negun and just got the one. I am currently in a dispute with them but just want some opinions etc...
  14. SPEED-DEMON

    DC2 ITR Ecu on EK4 SiR

    Both will have different maps to begin with. When in open loop mode which IIRC is below 50% throttle the car can make some small adjustments to fuel. However in closed loop when you give it more than the 50% throttle (for example) , it will pretty much fuel like an ITR and at the full top end of...
  15. SPEED-DEMON

    Hello everyone

    Hi guys I thought I registered on here ages ago but clearly didn't. Liking the site and plenty of info. My name is Gary, 24 and from Ireland. Have a 99 Integra SiR-G. Here's some pics Mugen and spoon parts side by side ^^^^^ LOL
  16. SPEED-DEMON

    Low position seat rail

    Just fitted these today (spoon) to my dc2. Seemed that the seat is slightly lop sided as the part where the seat belt holder bracket is welded above the rail and i think this causes the seat to sit up a little on one side. Anyone else experience this??
Back
Top