Search results


  1. coreyxpartridge

    how to connect omp wheel to horn

    Does anyone know why my horn is staying on when ever the tab touches the back of the boss?
  2. coreyxpartridge

    Harness bar

    Did you ever find an answer mate?
  3. coreyxpartridge

    Civic EG9 SiR BIG UPDATES

    Love an EG9 man, nice one. That teg is super nice aswell!
  4. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Engine loom and exhaust manifold now fitted. Nothing left to do on the engine until I know everything runs again as it should. Bit worried about having a preface loom with a facelift b16a2. Not sure if I’ll need to use a different dizzy yet. Tidied up my unit and have more space now . Need to...
  5. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Engine is now completely finished! :beer::dance: Fitted my cambelt and tensioner today, rocker cover on, new spark plugs in, NGK HT leads, carbon plug cover and new tegiwa rocker nuts fitted. Just need to paint the gearbox, fit the clutch and flywheel, fit the box and it’s going for mtonthe...
  6. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Torque mount brackets are all painted and on the engine. Look so good! Thought I might aswell repaint the rocker cover which I have (VHT WRINKLE BLACK). Looks great. The engine is now finished apart from valve clearances (can do when the engine is in the car) and cambelt kit which I will do...
  7. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Working on the car on Sunday. Have now sent off the bonnet and bumper which are being wrapped gloss black at the moment. Paint has now dried and the torque mounts and they look so good. Hoping to get the rocker cover repainted on Sunday, valve clearances, cambelt kit fitted and the rest of...
  8. coreyxpartridge

    Elliott's B20 Vtec EK build

    Love this build man. We are friends in Facebook and always see your posts. If you ever want to sell that front spoon strut brace please let me know as I have a rear and want a front matching brace :drool:
  9. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Had to make a trip to Honda this morning to pick up my inlet mani gasket, bought a couple online elsewhere and they weren’t right (annoying). I assumed they’d be more expensive genuine but it was cheaper anyway! I used Wynn’s carb cleaner and cleaned the throttle body and inlet (worked amazing...
  10. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    I’ll defintely look into it. Thanks
  11. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Will be updating tomorrow night. I’ve had about 15 parcels come through this week and now I’ve officially got everything I need to finish the car (apart from a harness). Going to Honda tomorrow morning to pick up my inlet gasket as I had a nightmare finding one! Which has been holding me back.
  12. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Stripped, cleaned and painted my inlet manifold and throttle body today. Can’t beleive how amazing it’s all come up, what a transformation. Fitted my new AEM High Flow Fuel Rail and fitted everything to my TB and inlet. I can’t fit the TB to the inlet as my carb cleaner hasn’t turned up yet as I...
  13. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    It’s been a year and a half since I’ve driven my car, my daily/family car Audi A4 Estate isn’t doing it for me haha. I’m not too far from Castle Combe which is my local track, I’d like to make a trip to some others like Cadwell and Santa Pod though this year. Travel up to 6two1 meet etc. And...
  14. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Thanks man I appreciate that. Yeah, I’m loving it. Should be on the road and ‘finished’ in March. I have a track day booked April :beer:
  15. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    These are the current specs. 70% of these mods are all new for this winter build. Engine spec: RPC Stage 1 Clutch RPC 3.6kg Lightened Flywheel AEM High Flow Fuel Rail AEM V2 Cold Air Feed Induction Arm S300 Chipped and Socketed P28 ECU (with 4K launch control and raised 8.5k rev limiter)...
  16. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Engine spec: (All new) RPC Stage 1 Clutch RPC 3.6kg Lightened Flywheel AEM High Flow Fuel Rail AEM V2 Cold Air Feed Induction Arm Tri-Core 56mm Aluminium Radiator Carbon Fibre Plug Cover NGK Blue HT Leads Skunk2 Black Series Battery Tie Down Skunk2 Black Series Oil Cap Skunk2 Black Series...
  17. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    I now have picked up my new bonnet, front bumper, SiR grill, Mugen splitter, carbon mirrors and a few other little bits. Now I’ve started on the engine. Got the box split off and the engine up on the stand. I’ve stripped it down, spend a day with gunk cleaner wire brushing and trying to get 20...
  18. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Test fitting my new BYC Aluminium Sideskirts. Rear bumper back on. Bootlid off to weld up the spoiler holes and fillered ready for paint. Engine bay painted and bottom half undersealed
  19. coreyxpartridge

    Black Preface EJ6 Coupe - Track/Fast Road

    Engine bay repainted in satin black. Will look nice with the bits I have for the engine bay as I want the nice, new looking engine to stand out. And i didn’t want a fancy colour as it’s not a show car :)) Prepped, sanded and primered.
Top