Search results

  1. iRELOADED

    Rear Upper Strut Brace

    As title. Rear strut brace wanted for EK hatch Im after something that matches my build and will stand out while also being subtle over the flat rear floor I have ready to go in
  2. iRELOADED

    Civic Jordan 258 rebuild

    Wont find out until later today once my guy has been down to the dyno. Even then it could be later this week I find out once he has checked his schedule as race season is making dyno time a bit of a pain to get from him
  3. iRELOADED

    ADVAN A048 190/580/15 (195-50-15)

    Will pop by and say hi one weekend then. I spanner for Murfin Motorsport in the clover green ek
  4. iRELOADED

    ADVAN A048 190/580/15 (195-50-15)

    Completely off topic, but given when you said you used them at croft and that its an EG with 210 bhp, are you racing in the 750MC Hot Hatch?
  5. iRELOADED

    The uks cheapest 3rd gen Prelude?

    What a steal at £650!
  6. iRELOADED

    Civic Jordan 258 rebuild

    Engine is now back together and ready for dyno, just waiting for a date now
  7. iRELOADED

    Mimms Honda Day @ 3 Sisters Circuit -29th May 2022

    Weekend after I get back from long work trip, so even if the car was ready I wouldnt be able to make it
  8. iRELOADED

    Project EK9 Boost

    Tank looks great! Forgot to mention what Vish said, we have dc2 LCA on the car
  9. iRELOADED

    Project EK9 Boost

    Think its the holes lined up with the bolt in your second photo there. At least thats where we connected some angle brackets for ours on the race civic
  10. iRELOADED

    Civic Jordan 258 rebuild

    So more bad news came my way today, the head is scrap... Valve guides ended up getting distorted while it was running on the dyno with timing out. They were so bent they wouldnt come out the block. Block was also distorted slightly and after measuring there was not enough metal left to skim it...
  11. iRELOADED

    Civic Jordan 258 rebuild

    Erm no... got everything ordered. Valves have arrived along with new stem seals, but the piston is still in transit from america Waiting for that and then the engine can be assembled adn back in for tune
  12. iRELOADED

    Civic Jordan 258 rebuild

    So one of the exhaust valves on the affected cylinder had a hole blown in it, this then scratched up the piston. New piston, set of exhaust valves and then bearings to be safe and hopefully dyno run will go well Luckily no other signs of anything being wrong, for once the oil was mint and...
  13. iRELOADED

    Civic Jordan 258 rebuild

    So had it on the dyno and had some detonation issues in one clyinder. turned out the ecu calibration of the crank angle sensor was out. Apparently this was calibrated and the issue still persisted. Awaiting the strip down to find out whats actually wrong now. Wish this thing would just work :(
  14. iRELOADED

    Update on H-swap EK

    just about any solvent should clean it out, so diesel would probably work cant help on the filling it back up though
  15. iRELOADED

    Spoon Ek9 Cluster for sale

    ouch!
  16. iRELOADED

    1999 Honda Civic lx d16y8 swap

    probably your harness or the tune on the ecu. AFAIK the only difference is the inclusion of VTEC and a knock sensor on the y8 as opposed to the y7
  17. iRELOADED

    First swiss ek9 and modding story

    Great update, full of tips as well as detailed info on what your doing
  18. iRELOADED

    Tire Pressure

    Depends what your doing as track driving would get the tyres hotter and thus increase the pressure. If your just on road then cant go too wrong with the trusty old 30 psi - typical OEM pressure for several marques
  19. iRELOADED

    Just bought an EM1 - Advice needed

    putting a multimeter in where the fuse should be on continuity and then checking if you get some with operation of the various items would be a starting point to tell you in the circuit is good or not. If you have indicators but no hazards I would assume its the button thats faulty rather than...
  20. iRELOADED

    Instagram sellers?

    hondaaccessrareparts is legit, bought a few bits from him
Top