Team dynamics prorace 1.2 spoon clearance


Butters

New Member
Joined
Jul 23, 2019
Messages
3
Car(s)
Dc2
Hello all new to the forum have tried the search but couldn’t find anything so thought I’d post

I’m trying to find the offset required to clear spoon twin blocks with td1.2 wheels

7 inch rim but not sure what offset to A; clear the callipers and B: fit in the rear arches not rolled

Apologies if this had been covered before :)
 
From experience a 7J with an offset of +35 is about the most you could get away with using natural camber and 195 tyre (Could maybe get away with a 205 tyre). This is on the rear for arch clearance.

Don't think you should have any bother with calipers, I've saw people use OEM wheels with a small spacer.
 
From experience a 7J with an offset of +35 is about the most you could get away with using natural camber and 195 tyre (Could maybe get away with a 205 tyre). This is on the rear for arch clearance.

Don't think you should have any bother with calipers, I've saw people use OEM wheels with a small spacer.
Hi kipper thanks for the reply

The spokes don’t give a lot of clearance and am personally scared of spacers after loosing a wheel lol

Rear camber is about 2mm give or take and 195 section tyres . Not sure but offset options seem to be 38 or 32 not sure if 32 would work for the rear
 
Back
Top