Recent content by Matt tynan

Update: Still no better off, got a new rotor and cap and made no difference Thought maybe I've a fuel issue as I've a nice blue spark at the plugs so no issues with ignition no more, i removed the fuel rail/injectors from the head and turned her over to see if there all spraying as they...

Weird thing is I have spark now after changing the coil but still not starting not even a kick, checked injector pulse and that's good, fuel pump is priming fine and I can smell fuel from the exhaust, code seems to have vanished but still no start

Hey lads I know this topic has been covered many times over but Im completely lost, basically was driving my ek civic (b18c) and it just stopped dead on my way home, pulled at the side of the road and it started up right away again got back home and cut out again, this time it will not start...

Probably the hardest thing to ever to do with a car is trace other people's mistakes :angry2:, absolutely delighted shes running great no issues whatsoever :)), just to tidy her up now for the nice weather and see what else i can improve on

Sorted lads, few chopped wires at my ecu on the new loom, rewired together and she started right up, one of which a looks to be a ground, not too sure from where but is brown with a black stripe, might help someone in the future :nice:

Anyone at all???

Hey lads once again im having ignition issues, long story short i replaced my engine loom (obd2b) on my b18c ej9, since swapping i noticed my engine light aswell as oil light will not come on when ignition is switched on, usually the engine light goes off after about 3 seconds roughly, ive full...

Ill give it a go lad, for the price its worth a try, i need it for my b18 swap aswell hahah, if its been a year should do the job, cheers for the feedback :nice:

Ive seen those alright, there fairly cheap and from China so kinda pit me off buying it, are they any good?

Hey lads just on the lookout for a few bits :Obd2b to obd2a conversion harness :Ek4 sir clocks :carbon slug intake (whale *****) Located in ireland so must be willing to ship Thanks

Price on defi afr gauge? and what ek are the speedo clocks from? Ek9 ek4 or just ej9 Cheers

Glad you got it sorted, no bigger headache than wiring issues :angry2:

I have a volt gauge in my own and it always reads 14 volts when running and never drops, my engine light comes on alright every now and than but a quick erase of the code and it doesn't come on for about a week or so, all i need is a jap fuse box with the eld and that shoukd sort out the light...

I have pal, i just sourced myself the 4 pin connector and soldered it on, i just blanked off the eld wire and have no issues with charging

Thanks mate appreciate it :nice: