Recent content by ibiris


  1. ibiris

    Enigne light now on after timing belt attemp

    Repair it and reset the ECU.....
  2. ibiris

    Driving me mad!!! Please help

    Use a hammer and screwdriver to assist the stuck rotor. I had to do this to replace my worn one, no other way to get it off.
  3. ibiris

    EK9/DC2 cat and MOT

    You may be able to improve the emissions by smashing the car through a terraclean or similar system if you have them in Portugal, or maybe even getting the injectors ultrasonically cleaned. What elchunk said worked to get my Civic through an emissions test a couple of years ago. Terraclean then...
  4. ibiris

    Car not starting

    What voltage do you have at the battery?
  5. ibiris

    Swapping injectors to new manifold, what do I need?

    Maybe have a word with Stew at Spirit9. He can do injector cleaning for a decent price and will also replace the seals. Either way, you could get them cleaned or find out which seals should be replaced :)
  6. ibiris

    idel control valve

    Part No 36450-P6T-S01. Have you tried giving it a good clean first though?
  7. ibiris

    WTB: EK9 Steering rack

    According to this: http://www.crxsi.com/jdm/ek9-1004248/Steering-Brakes-Suspension-Steering-Column2.htm The part number is 53200-S04-J82. On Lings it is listed as superceded by P/N 53200-S04-J83 - not cheap by the way :nono: Hope this helps.
  8. ibiris

    Quick Vtec Tunnel

    Good appreciative giggle at the end too ;-)
  9. ibiris

    DC5 steering wheel

    What is the outside diameter of the DC5 wheel? Is it smaller than the OEM EK4 one? I've always found that it feels a bit on the big side for the size of car.
  10. ibiris

    My ek9 cutting out no idle

    Inside the distributor, underneath the shield that is behind the rotor.
  11. ibiris

    Exhaust manifold securing bolt length

    I ordered x7 bolts to replace the ones used to secure the manifold to the head from my local dealer. 2 of the correct ones came in, along with the studs etc, and the guy on the parts desk told me that he'd managed to match up the bolts with another one they had in stock. When I got there, they...
  12. ibiris

    Advice on exhaust fitment required

    I'll try: Is it physically possible to fit a cat of 2.5" diameter to a 2.25" diameter B-pipe and still maintain a gas tight seal? Or will I need to fit some sort of reducer in between to make them compatible?
  13. ibiris

    Advice on exhaust fitment required

    For anyone interested, and for future reference I've gone for the following. Original, rather lengthy, message is below. UNIVERSAL-FIT CATALYTIC CONVERTER Part #59956 I found a number for Nemesis UK, which are a official distributor of Magnaflow products. Spoke to a helpful chap who...
  14. ibiris

    MOT Fail on high emissions

    TerraClean ;-) It sorted mine out!
  15. ibiris

    o2 sensor needs replacing. Little help please?

    If you don't have access to a Honda dealer and require the Honda OEM part then try here: Lings Honda Parts
Back
Top