What ECU to use??

[Stuarty]

Alrighty people I'm fitting a B18c block to my 2000 model EK9 using the B16b head. What i want to know is what ECU i should/can use while using the original EK9 loom? I'm pretty sure i just need one from a 98 spec DC2 but i just want to make sure.

Cheers

 

[EK9turbo]

Hondata

 

[JIMBOB-EK9]

Hondata with a custom WILL tune!

But if you just want a stock 98 spec B18 ecu i have one for sale!
just give me a PM if your intrested!

 

[sek2dts@aol.com]

Alrighty people I'm fitting a B18c block to my 2000 model EK9 using the B16b head. What i want to know is what ECU i should/can use while using the original EK9 loom? I'm pretty sure i just need one from a 98 spec DC2 but i just want to make sure.

Cheers

you'll need one of these if your using a 96-99 itr ecu
Rywire - Online Store

 

[Stuarty]

Hondata

To be honest mate i'm just at the stage where i want it at least running then i will think about a ECU upgrade. I ain't to clued up on how all that works ethier seems quite complicated lol Can you explain it a bit more

Hondata with a custom WILL tune!

But if you just want a stock 98 spec B18 ecu i have one for sale!
just give me a PM if your intrested!

Would this be straight plug in play or do you need the conversion harness as im using the EK9 loom?

How much you wanting for it anyhow?

 

[rice]

facelift ek9's run a unique ecu obd2b.
you will need a obd2b to obd2a conversion harness and no need to change your loom.
i have heard that apparently some of the later tegs run the same but not to sure and it might be harder to get hold of one of the ecu's.
i just ordered my conversion harness of phearable.net

 

[pimpinblackcivic]

if you are running teg pistons then teg ecu is deffo what you need mate

 

[J700OCK]

go hondata mate and get will (ek9turbo) to do your mapping/tuneing