Valve Springs


Glenn1

New Member
Joined
Dec 17, 2013
Messages
21
Hi guys,

I am rebuilding my b16a and was going to rebuild the valve-train with Integra dual valvesprings and LMA so that I can get the most from the b18c cams I have. So I ordered all the parts required from honda but it turns out the intake valve springs are discontinued and cannot be got. I am now stuck with what to do. what valvesprings can I buy that will allow me to use my b18 cams still? I was looking at Toda items but I am unsure if the spring resistance is to much for the cams and if they will damage them and will they work with all the other oem honda items I bought. Any help is appreciated.

Glenn.
 
Any uprated springs would work - I have toda springs and cams.

Try r motion or similar for a used set of springs though?
I sold itr ones for not much.
 
But would the uprated springs be to extreme for the cams I am using?
 
It wouldnt cause any problems except perhaps accelerating wear a bit. For stock cams of course the stock springs are the best suited.
 
type r valve springs are discontinued from Honda, unless you know where I can get some??
 
Back
Top