Valve Clearances

[Jokeshopbeard]

Was hoping to get my valve clearances done soon as she's just nudging the 75k mark. From my understanding it aint that much of a difficult job & I'd far rather do it myself than get a garage to do it, at least I can guarantee a quality job that way!!

So I was hoping somebody that has done the job before wouldn't mind doing a bit of a write up on it. I know the basics but its always nice to get a few tips from someone who has done the job before...

Also, do you guys know what the clearances should be when cold?

Any help appreciated as always, thanks in advance guys

 

[VTI_EG_DAN]

B18C Valve Adjustment - Honda, Acura Tech Website, tutorials, tuning and HOW-TO's. Drag racing, street racing, road racing - C-speedracing.com

is same mate as b16b i tihnk? well the specs are prob different but that is how u need to do it! so hopefully some one has specs on here

 

[EK9turbo]

0.006"-0.007" intake
0.007"-0.008" exhaust

You need a 10mm metric jam-nut adjusting tool like the snapon one.

 

[VTI_EG_DAN]

exactly the same as the B18C1 in the guide then

 

[EK9turbo]

You can use a stepped spanner but for the cost you might aswell buy the special snapon tool. the honda ones no-longer available.

 

[Jokeshopbeard]

Cheers for the info guys, lookin forward to the job now!!