Tsuchinoko EG6 Joined Feb 19, 2008 Messages 466 Apr 28, 2008 #1 Hello, Any one here tried this set of cams on a B16A2? If yes how is it? Thanks
B babyface -R- Joined Apr 23, 2007 Messages 2,223 Apr 30, 2008 #2 i had a friend that had this in the car he bought. it ran 190 ish bhp with over 20 hours of tuning(chrome). redline was set just a little over the 9k mark and it was faster than my 9.very smooth power deliver using the stock air box
i had a friend that had this in the car he bought. it ran 190 ish bhp with over 20 hours of tuning(chrome). redline was set just a little over the 9k mark and it was faster than my 9.very smooth power deliver using the stock air box
denward ex '00 Silver ek9 Rx Joined Feb 24, 2007 Messages 924 May 1, 2008 #3 dont you need block work for stage 3 cams??? gettin into big bucks then
rvm admin Staff member Joined Apr 15, 2006 Messages 10,695 Car(s) EK9/Civic May 2, 2008 #4 They're good, but I've only seen them in B16A with more than 12.1 compression in the motor.
RagingAngel 本田 Gearing Authority Joined Mar 26, 2008 Messages 2,161 May 2, 2008 #5 In short they work well. But you'll need some decent supporting mods like a good header at the very least and somebody who is competent with ecu mapping. the link for this info is all but dead, but the guy here YouTube - preview of GhettoRacer in Hot Version video American Touge 3 ...is whom I'm referring to...
In short they work well. But you'll need some decent supporting mods like a good header at the very least and somebody who is competent with ecu mapping. the link for this info is all but dead, but the guy here YouTube - preview of GhettoRacer in Hot Version video American Touge 3 ...is whom I'm referring to...