Mil spec engine harnesses


Sorry if this has been covered but if one was to go standalone ecu you could make up a fancy harness that makes it all plug and play?

As long as I can get relevant connectors then yes not a problem. There are a few connectors that aren't common between b and k series, but I know they are available.
 
Maybe a better picture now I've finished one.
So..thick red to battery, black to earth(bolt relay down), flick the switch and hey presto...up to 30amp switched feeds.

View attachment 35260

View attachment 35261

I'm thinking a price of between £34.99-£39.99?

Could you use this to run a cut off to your fuel pump?

I'm thinking more for security reasons with a hidden switch.... I've "seen it done" without a relay but heard bad stories of this not being the best way to do it due to it not being fused.

I'm a retard when it comes to wiring so trying to learn haha.
 
You could use it, but it's a bit overkill tbh. I could wire you a far simpler relay that would do the same thing. Or you can get inventive and fit something like an extra OEM fog light switch and wire it through that :)

You'd probably need a decent idea of what your doing though to go that far ha ha
 
Ask and thou shall receive @R1PPU

Plug and play push start for both b & k series. Hide the switch and you also have an excellent diy immobiliser.

Run the 2 cables into the engine bay. Bolt the ring terminal to the positive of the battery. Run the other cable to the starter bandix and plug connector in.
IMG_3130.JPG


Bolt down the relay and earth terminal.

Run the switch & cable and fit.

IMG_3129.JPG


Hey presto, you've fitted a push start :)

Standard basic button loom £49

With chrome engine start button £65

IMG_3131.JPG
 
Slowly unfortunately. Quite a few loom cables are built, just awaiting connectors and pins. I'm hoping to have a proper update tomorrow or Friday, so I'll know when they are landing.
Apologies for those waiting, I'm trying my upmost to get things moving along
 
Good stuff! I'm in no panic just wondering how you were getting on:) that push button would look well on the interior loom:)
 
Good stuff! I'm in no panic just wondering how you were getting on:) that push button would look well on the interior loom:)

Ha ha. I can't wait to get stuck in, I'm proper chomping at the bit :)

I've got some more sexy bits for the interior looms, and maybe some complete panels if you're a good lad haha
 
If you'd have asked that at 6am this morning I would have said next week. I've literally just had an emai from FedEx telling me the parcel won't be here till Jan 7th!!
Arrghhhh
 
Back
Top