Few pictures of the turbo back system we did on an EG


TheBooosh...!

Active Member
Joined
Nov 17, 2008
Messages
945
Hi All,

I would just like to share with you some pictures of the recent exhaust system we made for a customer.

Car is a Honda Civic EG. B18c4 block, B16 head, Turbocharged.

The system consisted of:

2.5'' Downpipe
2.5'' Downpipe back with one silencer
3'' Turned down tail pipe
1.75'' Screamer pipe
All of our systems are made with mandrel bends.

Turbo flange in situ.


First part of the downpipe being tacked into position.


Flexi and middle section of the downpipe being pieced together.



Adding the final section.


And done.







Now onto the rear section of the exhaust.

Welding the tail pipe together and onto the box.


On with the hangers.


And onto the flanged section.


Back box complete.


In position on the car.



And now last but not least, the screamer, customer requested out of bonnet and presented the car with the hole pre cut.




We hope you enjoy what you see :)

If you have any requirements please let us know.

Thanks for looking.

Regards

Ben
 
Last edited:
Looks like a decent job, how much would something like this cost?
 
Thanks Jesse. For this complete system in 2.5" and one box including the downpipe and screamer it was £360.

But it all depends on what your after. Let us know and we will give you a quote.

Thanks again

Ben
 
Thanks.
I'll contact you closer the time.
 
Yeah we try to keep a prices below the other companies around here as we know what its like when people want something doing and are getting charged the earth for it. We enjoy what we do so that will always keep prices down.

We are based in Walsall, West Midlands

Thanks
 
Would you be able to add an extra resonator/silencer to a 2.75" system? Just after the cat. Have a skunk2 exhaust and its way too loud. LOL
 
Hi DV8,

Yes of course we can. What is the Skunk2 system like, does it have two boxes already? one small in the centre section and one larger round rear box? or is it just one rear box? is the cat removed?

Not that any of this matters as such just interested as to why its as loud as it is.

:)

Thanks

Ben
 
Yes of course we can. What is the Skunk2 system like, does it have two boxes already? one small in the centre section and one larger round rear box? or is it just one rear box? is the cat removed?

Its got one mid resonator (bullet type thingy) and just the back box. My turbo downpipe is one piece and finishes where the cat normally does (so no cat). Would be looking to do it in the future so no immediate rush.
 
OK cool like most systems then.
Oh it's turbocharged and its still really loud... are you running a screamer pipe? or is it redirected into the downpipe? Is it on normal driving its too loud or idle or at WOT?
But yeah we can arrange another box to go in there no problem, just let us know as and when and we can sort something out for you.

Thanks again

Ben
 
Back
Top