Rocker cover breather fixings & piping.


Crouchy

Member
Joined
Apr 27, 2012
Messages
76
Anyone know where I can get the fixings as I want to change the right hand side breather as it rests on the manifold and its started leaking as well.
I have no idea what size it is, I'm guessing AN -10? I did message Ricky @ Race-Tech but got no reply.
Want to try a route it as far away from the manifold as possible...
Any help/advice appreciated


Here's a few photo's:



 
I would be really surprised if it's as big as an an10, that's quite a chunky monkey.

More likely an an6/8 looking at it.

I'm sure you could work it out by chopping it and measuring the id of the pipe or working out spanner size of the fitting and converting to -an. I'd personally wait for an answer from Ricky.
 
Using my eyeballs I'm pretty sure they are an10.
Use the method above but pretty sure I'm right.
 
they are definitely an10, I use an10 on my rocker cover and an6 & 8 on my fuel system you will notice the difference between 10 and 8, I use a company called www.torques.co.uk their fittings are amazing qaulity
 
I've got torques and aeromotive fittings on mine. Torques ones are cheaper and really good quality, was surprised when I got them. Aeromotive feel slightly better made in your hand but ££

I think they look AN10 too, it's the common size used for the breathers off the rocker :)
 
I don't know where these fittings came from but I removed them today and the way they fix are retarded, getting some replacement ones made up this week to hopefully sort out my leaking issue.

The leaking probably wasn't helped by the fact my catch can was full of oil vapour, don't think in the 15K its done its ever been emptied.

Hope to get this sorted asap as I can't drive it at the moment :(


I've got torques and aeromotive fittings on mine. Torques ones are cheaper and really good quality, was surprised when I got them. Aeromotive feel slightly better made in your hand but ££

I think they look AN10 too, it's the common size used for the breathers off the rocker :)

Have you got a link Nicole? Thanks
 
My catch can use to fill up quickly on track. Opted for a drain back system in the end.
Are you only using the 2 ports in the cover?
 
Back
Top