4x100 282mm discs


LoganK

LoganK

KSWAP THE WORLD
Joined
Jun 7, 2011
Messages
1,995
Looking for a set of front 282 discs 4x100.

Decent discs as they will be used on track with ds2500 pads.

Anyone any recommendations and places to buy?

Was looking at Mtec ones but the vendor on here never got back to me with a price and that was well over a week ago so now looking elsewhere.
 
Motorfactors? I always used motorfactor discs and never warped one. Using Redstuff pads then DS2500. This was the 300mm conversion.
 
Murray said:
Motorfactors? I always used motorfactor discs and never warped one. Using Redstuff pads then DS2500. This was the 300mm conversion.
Click to expand...

Just the cheap blank ones like Delphi or something? I'd need to get MG discs if it was motorfactors ones I think
 
Brembo blanks are good if you can get them
 
Wonder if they done brembo blanks for an mg zs! Will have a look :)
 
LoganK said:
Just the cheap blank ones like Delphi or something? I'd need to get MG discs if it was motorfactors ones I think
Click to expand...

Yeah. Most of the time warped discs are not warped. But pad build up due to improper bedding in
 
Blueprint discs are good Logan, I had them before and managed to majorly overheat them (they went purple haha) and the pedal still felt fine minus the car not stopping because I'd managed to melt the pads haha.

I got some others from Dingbro in a red and white box and they were ****, warped after 6 months with JSP's Nissin pads. Back to Blueprint discs now and it's all good.
 
Murray said:
Yeah. Most of the time warped discs are not warped. But pad build up due to improper bedding in
Click to expand...

I see! Yeah I am going to bed the ds2500 in the way it says on the leaflet so hopefully that will help.

R1PPU said:
Blueprint discs are good Logan, I had them before and managed to majorly overheat them (they went purple haha) and the pedal still felt fine minus the car not stopping because I'd managed to melt the pads haha.

I got some others from Dingbro in a red and white box and they were ****, warped after 6 months with JSP's Nissin pads. Back to Blueprint discs now and it's all good.
Click to expand...

Cheers mate, will have a look for these :)! I don't mind paying a bit for decent discs but if cheaper ones do the job then that's a bonus!
 
You must log in or register to reply here.
Back
Top