ek9 bias valve


EK-leo

EK-leo

Member
Joined
Apr 25, 2011
Messages
55
Wanted Ek9 Bias valve
Also MGZr carriers


Basically need a bias valve so that my brake set up actually does its job lol
and carriers that will allow my to fit MB6 callipers and disc to my 4x100 vti rear setup
 
Do you run ABS? If you do I should have EK9 ABS valve home, £10 plus postage
 
I don't run abs but I think it will still work let me confirm if it works you got a sale
 
Thanks for the reply. Yes 40/40 is what I'm looking for but do I need non abs model then ?
 
That's what 40/40 is from afaik, if you don't run ABS you cannot use one from a car that runs ABS
 
No they are different that's why non ABS are more expensive as they are in short supply (compared to abs)
 
EK-leo said:
I just can't see why not aren't abs and non abs both 40/40
Click to expand...

I've always wondered this, what is the actuall difference, they are both 40/40 from what I've read?
 
If they are both 40/40 im 100% they will fit abs or not anyways couldn't be bothered to wait so just bought one from eternal blue.
 
Well TBH I don't know what the actual difference is, I guess we need someone to check what the two part numbers are to see what the difference is? If the part number is the same for both ABS and NON-ABS models then there obviously is no difference! Everywhere I went when researching "ABS delete" it said you need a prop valve from a Non-ABS car, so I just went with it (surely all these people can't be wrong.... Or can they?). I ended up buying a shell that had no ABS from the factory so I sold the prop valve I got from Ricky before I got my new shell. But I guess there is a possibility it could all well be just a hoax and there in fact is no difference!
 
End of the day its a valve that splits pressure it's a feeder so with that in mind there's no reason for it to be different and if it was you could probably just get away with line modification lol anyways some honda guru will confirm but from a logical point of view I think I'm right
 
Well I'm not arguing with you, it could have something to do with the pulsing of ABS or whatever. If we get two EK9 vin codes one with ABS one without could someone cross reference it? I have non-ABS EK9 so we just need someone with ABS EK9 (can't remember the vin of my old 9...)
 
The valves are different, the non abs valve has 2 extra ports,

The way the abs pump is plumbed in means the 2 extra ports aren't required
 
Thanks for clearing up and thanks for the recommendations have the part now
 
So basically if you just t piece off the MC you can use abs prop valve to run non abs to same effect?
 
No ^^^^. ABS prop valve to no abs prop valve part numbers differ as well as the way they function
 
You must log in or register to reply here.
Back
Top