Recent content by CivicTypeR

Hey Magik, I have Skunk2 Pro-C Coilovers on my 97 Civic Si Coupe. They are excellent on the track. My friend who has 15 years experience with tracking, tested out my ride and he likes them alot. People say my car handles like a go-kart. :D Heres a post with my video on it...

I'm from Canada :D

First time at Cayuga Track. I'm running 15x7" Rota with bridgestone potenza re01 185/50/15. Skunk2 Pro-C Coilovers Front Eibach SwayBar Heres The first Video , Road is still wet and I'm still learning the track. Tire Psi: 35 all around Suspension set at 4 out of 12 all around...

Hello, Just done the B18 type R swap into my 99 civic hatch. When the car idling at 1200rpm. I have done checking some of the step. Changed ECU. Changed IACV. Changed TPS. Changed MAP sensor. Adjust the knob under the throttle body. No vacuum leaks. Clean throttle body. But...

poor poor civics :angry2:

oh man, I just found out that I would have to take out my ac if I wanna go full width... I wanna keep my ac thou... I'm going to have to find a full aluminum one now... that's not gonna take up the whole space..

ya, i know whatcha mean blinx. Thanks guys.

I Thinking im going to get the koyo aluminum radiator. Koyo Aluminum Radiator: No Limit Motorsport Think that will be good?

Hi guys, I had a Stock Radiator for my 97 Honda Civic Si. Went to the track and beat the hell out of it. After 4 laps, my coolant Spray all over my engine... Turns out that there was so much pressure that the seal at the top of the radiator was no good, everything spray out of the top. So I'm...

Great! Thanks guys

HI guy, I was wondering if a ITR Rear sway bar will with on a 97 Civic Si Coupe? I had Eibach Sway bar on front and back but turns out that the Eibach Rear Sway bar isn't compatible with the ASR Brace so I have to get the ITR. Please and Thanks!

I'm getting my skunk2 pro-c install right now... Can't wait to see what it's like.

Hi guys, I have a b16b engine.. My current mods are exhaust and cold air intake. I want to buy a skunk2 Throttle Body with 68mm... I'm wondering should I get my CTR intake manifold and bore it to 68mm? or just get a skunk2 Intake manifold at 68mm? My future mods are going to be : Toda...

Thanks for the info, that was what i was looking for.

Heys, I have a 97 Honda civic Si with B16B motor, Only got exhaust and intake done. Future plan is to have Toba Spec B cam shaft, Toda Headers. This is going to be my daily drive :). I'm looking for a good ecu that will give me the best result.