TheBooosh...!
Active Member
- Joined
- Nov 17, 2008
- Messages
- 945
Hi All,
I would just like to share with you some pictures of the recent exhaust system we made for a customer.
Car is a Honda Civic EG. B18c4 block, B16 head, Turbocharged.
The system consisted of:
2.5'' Downpipe
2.5'' Downpipe back with one silencer
3'' Turned down tail pipe
1.75'' Screamer pipe
All of our systems are made with mandrel bends.
Turbo flange in situ.
First part of the downpipe being tacked into position.
Flexi and middle section of the downpipe being pieced together.
Adding the final section.
And done.
Now onto the rear section of the exhaust.
Welding the tail pipe together and onto the box.
On with the hangers.
And onto the flanged section.
Back box complete.
In position on the car.
And now last but not least, the screamer, customer requested out of bonnet and presented the car with the hole pre cut.
We hope you enjoy what you see
If you have any requirements please let us know.
Thanks for looking.
Regards
Ben
I would just like to share with you some pictures of the recent exhaust system we made for a customer.
Car is a Honda Civic EG. B18c4 block, B16 head, Turbocharged.
The system consisted of:
2.5'' Downpipe
2.5'' Downpipe back with one silencer
3'' Turned down tail pipe
1.75'' Screamer pipe
All of our systems are made with mandrel bends.
Turbo flange in situ.
First part of the downpipe being tacked into position.
Flexi and middle section of the downpipe being pieced together.
Adding the final section.
And done.
Now onto the rear section of the exhaust.
Welding the tail pipe together and onto the box.
On with the hangers.
And onto the flanged section.
Back box complete.
In position on the car.
And now last but not least, the screamer, customer requested out of bonnet and presented the car with the hole pre cut.
We hope you enjoy what you see
If you have any requirements please let us know.
Thanks for looking.
Regards
Ben
Last edited: