kev_ek9
Active Member
- Joined
- Jan 27, 2009
- Messages
- 1,297
Item for sale: B18C Bottom End
Reputation: kev_ek9
Price: £300 offers will be considered as need this gone
Paypal?: yes as long as 4% fees covered, can also deliver at extra cost
Location: n.wales
Condition: 7/10
Description: this is B18C Bottom End which was fully rebuilt around 15k miles ago. The crank was polished, ACL Race bearings and thrust washers fitted, and the pistons are oversize as well. All gaskets/seals and the pistons/rings were sourced through SimAuto.
seems like the bearings have gone as the bottom end is knocking i have bought a new engine so this is no longer needed offers for this item. i paid £790 for it
still in car but will be coming out soon
Pictures:
these are the ones i was sent before as i was buying the bottom end
Bores as you can see are on top condition, as are the tops of the crowns. Only marks you can see on the bores are from when it was honed
Item for sale: B16B head
Reputation: kev_ek9
Price: £450 offers will be considered as need this gone
Paypal?: yes as long as 4% fees covered, can also deliver at extra cost
Location: n.wales
Condition: 9/10
Description: B16B head, the exhaust valve was damaged so head was sent off and had new valve from honda also was pressure tested when this item was replaced to make sure it was all done correct, also when this set up was all dont the water pump and cam belt were also done
Pictures: will get some up when i get a chance, not much to see though as its not out of car atm but will be soon no inlet manifold cam cover will be replaced with a black one unless someone really wants to buy it but has burn marks on cam side where it was set next to something hot
Reputation: kev_ek9
Price: £300 offers will be considered as need this gone
Paypal?: yes as long as 4% fees covered, can also deliver at extra cost
Location: n.wales
Condition: 7/10
Description: this is B18C Bottom End which was fully rebuilt around 15k miles ago. The crank was polished, ACL Race bearings and thrust washers fitted, and the pistons are oversize as well. All gaskets/seals and the pistons/rings were sourced through SimAuto.
seems like the bearings have gone as the bottom end is knocking i have bought a new engine so this is no longer needed offers for this item. i paid £790 for it
still in car but will be coming out soon
Pictures:
these are the ones i was sent before as i was buying the bottom end
Bores as you can see are on top condition, as are the tops of the crowns. Only marks you can see on the bores are from when it was honed
Item for sale: B16B head
Reputation: kev_ek9
Price: £450 offers will be considered as need this gone
Paypal?: yes as long as 4% fees covered, can also deliver at extra cost
Location: n.wales
Condition: 9/10
Description: B16B head, the exhaust valve was damaged so head was sent off and had new valve from honda also was pressure tested when this item was replaced to make sure it was all done correct, also when this set up was all dont the water pump and cam belt were also done
Pictures: will get some up when i get a chance, not much to see though as its not out of car atm but will be soon no inlet manifold cam cover will be replaced with a black one unless someone really wants to buy it but has burn marks on cam side where it was set next to something hot