is this a B18c

leeK9 · 06-16-2008, 07:10 PM

going down tomorrow to pick up a ek9 with a teg type r engine but dont actually know if its really a B18c.i asked him and he says he had her traded in for another car(he is a dealer) so he doesnt really know

he doesnt know much about hondas i dont think

pic

leeK9 · 06-16-2008, 07:12 PM

oh and shes soo dirty because he she hasnt been drivin in a few weeks

and yes the cover is gash and im changing it asap

heres another pic i found of it

aj17ay · 06-16-2008, 07:28 PM

Have a look for the engine code 'B18C' very close to the manifold on the left.

Should tell you exactly what engine it is.

rvm · 06-16-2008, 07:35 PM

Quote:

Originally Posted by aj17ay

Have a look for the engine code 'B18C' very close to the manifold on the left.

Should tell you exactly what engine it is.

correct, and if it is a b16b with a stroker kit the only way you will now if it is a B18C is by open up the motor and measure it or take it to a dyno, if it has between 120 lb/ft of torque + it is a B18C

leeK9 · 06-16-2008, 07:50 PM

yea i know where the ngine code is.i was trying to expalin to him but he though i was being silly and it was like half 12 at night so my bad.

im just wondering if you guys can tell as the intake manifold looks different to b16b's

rvm · 06-16-2008, 07:55 PM

Quote:

Originally Posted by saxo_vts

yea i know where the ngine code is.i was trying to expalin to him but he though i was being silly and it was like half 12 at night so my bad.

im just wondering if you guys can tell as the intake manifold looks different to b16b's

My judgment seeing the intake quick is, that it is a oem intake without the box and a after market filter.

rvm · 06-16-2008, 07:56 PM

It has a oil catch can right?

Motor earth kit also....

sifikat_10ek4 · 06-16-2008, 09:18 PM

Quote:

Originally Posted by saxo_vts

yea i know where the ngine code is.i was trying to expalin to him but he though i was being silly and it was like half 12 at night so my bad.

im just wondering if you guys can tell as the intake manifold looks different to b16b's

The intake manifold is from B18 sure..

leeK9 · 06-16-2008, 09:37 PM

yea i dont know much about b18's yet.

i hope shes the real deal.she must be quite rapid

b16 mini · 06-16-2008, 09:56 PM

that intake manifold is b18, correct, but i believe its the type found on b18c1's and c4's which is like a civic vti 4 door or integra sir etc,never seen a itr with that inlet manifold,
if it is this engine then its a down grade in power over the b16b.
uk b18 c4 is approx 174 bhp.

if engine code is b18 c its jdm itr dc2 if its b18 c6 its itr dc2 uk model which are all good

sifikat_10ek4 · 06-16-2008, 10:05 PM

yeah correct b16 mini!!!

wildcat · 06-17-2008, 12:09 AM

I cant say much for the block ...

But the head on that engine is that of the B18c engine found in the 96-00
Honda Integra SIR found in japan
Acura Integra GSR found in the us

Just above the Exhaust manifold you should see a printed section marked P72

RagingAngel · 06-17-2008, 03:07 AM

Wildcat speaks the truth.

USDM P72 = 170bhp lower compression
JDM P72 = 180ps higher compression

eddie1522 · 06-17-2008, 08:59 AM

Quote:

Originally Posted by saxo_vts

oh and shes soo dirty because he she hasnt been drivin in a few weeks

and yes the cover is gash and im changing it asap

heres another pic i found of it

u can check the engine code..b16b or b18c1...the intake manifold and head is comfirm from b18c1 gsr...maybe owner change head b18c gsr want to get high compresion....

CAL · 06-17-2008, 09:13 AM

Dont want to sound bad mate but i would stay clear of it.

06-16-2008, 07:10 PM	#1 (permalink)
leeK9 EK9.org Fan Join Date: Feb 2008 Location: donegal, ireland Posts: 2,269	is this a B18c going down tomorrow to pick up a ek9 with a teg type r engine but dont actually know if its really a B18c.i asked him and he says he had her traded in for another car(he is a dealer) so he doesnt really know he doesnt know much about hondas i dont think pic

06-16-2008, 07:12 PM	#2 (permalink)
leeK9 EK9.org Fan Join Date: Feb 2008 Location: donegal, ireland Posts: 2,269	Re: is this a B18c oh and shes soo dirty because he she hasnt been drivin in a few weeks and yes the cover is gash and im changing it asap heres another pic i found of it

06-16-2008, 07:28 PM	#3 (permalink)
aj17ay '97 EK4 SiR Join Date: Jan 2008 Location: Birmingham, England Posts: 161	Re: is this a B18c Have a look for the engine code 'B18C' very close to the manifold on the left. Should tell you exactly what engine it is.

06-16-2008, 07:50 PM	#5 (permalink)
leeK9 EK9.org Fan Join Date: Feb 2008 Location: donegal, ireland Posts: 2,269	Re: is this a B18c yea i know where the ngine code is.i was trying to expalin to him but he though i was being silly and it was like half 12 at night so my bad. im just wondering if you guys can tell as the intake manifold looks different to b16b's

06-16-2008, 09:37 PM	#9 (permalink)
leeK9 EK9.org Fan Join Date: Feb 2008 Location: donegal, ireland Posts: 2,269	Re: is this a B18c yea i dont know much about b18's yet. i hope shes the real deal.she must be quite rapid

06-16-2008, 09:56 PM	#10 (permalink)
b16 mini B18 powered mini+ek9 Join Date: Mar 2008 Location: cornwall,uk Posts: 1,176	Re: is this a B18c that intake manifold is b18, correct, but i believe its the type found on b18c1's and c4's which is like a civic vti 4 door or integra sir etc,never seen a itr with that inlet manifold, if it is this engine then its a down grade in power over the b16b. uk b18 c4 is approx 174 bhp. if engine code is b18 c its jdm itr dc2 if its b18 c6 its itr dc2 uk model which are all good Last edited by b16 mini; 06-16-2008 at 10:08 PM.

06-16-2008, 10:05 PM	#11 (permalink)
sifikat_10ek4 EK9.org Addict! Join Date: Mar 2008 Location: Greece,Crete Posts: 733	Re: is this a B18c yeah correct b16 mini!!! __________________

06-17-2008, 12:09 AM	#12 (permalink)
wildcat EK3 Converted to EK9 Join Date: May 2008 Location: Kingston, Jamaica Posts: 52	Re: is this a B18c I cant say much for the block ... But the head on that engine is that of the B18c engine found in the 96-00 Honda Integra SIR found in japan Acura Integra GSR found in the us Just above the Exhaust manifold you should see a printed section marked P72 __________________ Vtec it's a way of life

06-17-2008, 03:07 AM	#13 (permalink)
RagingAngel 本田 Gearing Authority Join Date: Mar 2008 Location: Hong Kong Posts: 2,078	Re: is this a B18c Wildcat speaks the truth. USDM P72 = 170bhp lower compression JDM P72 = 180ps higher compression

06-17-2008, 09:13 AM	#15 (permalink)
CAL NHB EP3 Join Date: Feb 2008 Location: Edinburgh, Scotland Posts: 629	Re: is this a B18c Dont want to sound bad mate but i would stay clear of it. Last edited by CAL; 06-17-2008 at 03:11 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
B18C swap into EJ9(1,4)	pateras_vtec	Honda Integra Type R	54	01-26-2010 08:35 PM
My B18C Dyno Run	rvm	Engine	25	07-23-2008 03:05 AM
b18c ek9 ecu?	rice	Engine	21	05-27-2008 08:09 PM
99 B18c Ek9 For Sale	cormy	For Sale	2	03-18-2008 07:51 PM
98 b18c into 99 ek9	kayne	Engine	5	11-27-2007 04:50 AM