98 b18c into 99 ek9

kayne · 11-25-2007, 01:34 PM

Right have a facelift ek9 dash loom and engine loom to put into my EK with the b18c motor, will my car run alright on the b16b ecu or do i need to get a 98 ITR ecu and some jumper harness?

Any help appreciated

scyt7e · 11-25-2007, 03:35 PM

your b16b ecu should be OBDIIb which means the Harness which ur using assuming is ur ek9 harness will plug and play, only thing is a b18c ecu is different to a b16b ecu it'll work and run for sure, not as smooth maybe but still will do the job. you can use the 98 spec harness as well and then just use the 98 spec ecu its 1am i hope i wrote something that made sense

kayne · 11-25-2007, 04:27 PM

so a prefacelift loom will plug straight into the 98 b18c ecu but the facelift one wont?

Thanks

kayne · 11-26-2007, 05:18 PM

need help, wht you b18c Rs using?

rvm · 11-27-2007, 04:48 AM

Quote:

Originally Posted by kayne

so a prefacelift loom will plug straight into the 98 b18c ecu but the facelift one wont?

Thanks

Thats correct, because the pre facelift has a OBD2A ecu / harness. All JDM Integra Type R 95 - 01 came with OBD2A ecu.

I don't recommend you to use a B16B ecu in your B18C motor, since the B16B ecu has a higher rev limit, you should go with a B18C ecu with a obd2b to obd2a conversion harness.

You have the option to get a chipped OBD1 ecu for your car, also you can get a apexi power fc and tune it, but I've only heard good comments from the B18C integra type r ecu, if the motor is stock and you can get it at a good price, go for it.

I recommend you to check out this thread, just in case you have any doubts regarding the ecu harnesses

Honda OBD0 - OBD1 - OBD2A - OBD2B ecu differences.

rvm · 11-27-2007, 04:50 AM

Quote:

Originally Posted by scyt7e

your b16b ecu should be OBDIIb which means the Harness which ur using assuming is ur ek9 harness will plug and play, only thing is a b18c ecu is different to a b16b ecu it'll work and run for sure, not as smooth maybe but still will do the job. you can use the 98 spec harness as well and then just use the 98 spec ecu its 1am i hope i wrote something that made sense

Yep, he can use the b18c obd2a harness also

, thats a lot of work, but with patience a time, he can do it

11-25-2007, 01:34 PM	#1 (permalink)
kayne R Flavoured EK Join Date: Oct 2007 Location: Nr Birmingham Posts: 129	98 b18c into 99 ek9 Right have a facelift ek9 dash loom and engine loom to put into my EK with the b18c motor, will my car run alright on the b16b ecu or do i need to get a 98 ITR ecu and some jumper harness? Any help appreciated

11-25-2007, 03:35 PM	#2 (permalink)
scyt7e EK9.org Newbie Join Date: Nov 2007 Posts: 5	Re: 98 b18c into 99 ek9 your b16b ecu should be OBDIIb which means the Harness which ur using assuming is ur ek9 harness will plug and play, only thing is a b18c ecu is different to a b16b ecu it'll work and run for sure, not as smooth maybe but still will do the job. you can use the 98 spec harness as well and then just use the 98 spec ecu its 1am i hope i wrote something that made sense

11-25-2007, 04:27 PM	#3 (permalink)
kayne R Flavoured EK Join Date: Oct 2007 Location: Nr Birmingham Posts: 129	Re: 98 b18c into 99 ek9 so a prefacelift loom will plug straight into the 98 b18c ecu but the facelift one wont? Thanks

11-26-2007, 05:18 PM	#4 (permalink)
kayne R Flavoured EK Join Date: Oct 2007 Location: Nr Birmingham Posts: 129	Re: 98 b18c into 99 ek9 need help, wht you b18c Rs using?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fried b18c	Colin89	Want To Buy	18	06-27-2008 08:04 AM
B16A2 or Jdm B18C...	ej6er	Engine	14	11-15-2007 02:48 PM
Jdm B18c Gsr Black Top	skyR	Other Technical	36	07-13-2007 04:29 AM
B16B to B18C	cormy	Engine	25	06-25-2007 03:21 PM
JDM ECU Integra B18C-R	CivicPower	Honda Integra Type R	11	04-25-2007 02:45 PM