Hello chaps
I'm a newbie so go easy.
I recently bought CTR as a write off. It had been fully repaired but has been revving eratically.
From cold it revs to 3000 rpm and then drops to 2000 rpm and then the revs will jump up and down from 1500-2000 rpm.
I found TPS sensor socket damaged and you could pull the socket with contact pins out. Whether the pins are making contact or not with the circuit board, It still runs erratically.
I am at the point of buying a TPS but first I need to know if the TPS is definitely the problem and second where I can get one from.
I'm a newbie so go easy.
I recently bought CTR as a write off. It had been fully repaired but has been revving eratically.
From cold it revs to 3000 rpm and then drops to 2000 rpm and then the revs will jump up and down from 1500-2000 rpm.
I found TPS sensor socket damaged and you could pull the socket with contact pins out. Whether the pins are making contact or not with the circuit board, It still runs erratically.
I am at the point of buying a TPS but first I need to know if the TPS is definitely the problem and second where I can get one from.