ek9 engine conversion

330conor · 06-13-2009, 10:59 PM

hi there lads i have just completed an engine conversion on my ek9..the car was originally a 97' civic type r and now have replaced engine with a 98' integra engine...put the civic loom on the engine because of the way the ecu is but dont seem to be getting a fuel pump..so i wired the fuel pump to a switch and cranked it over but its not sparking??

has anyone experienced this problem before??

civicduty_ · 06-13-2009, 11:18 PM

Well I know the Integra ECM after a certain year came out with an immobilizer system that needs to detect the chip within the key as a theft deterrent. However it can be disabled. This might be shitting the stick with your swap. I hope this helps any.

Accessory Zone · 06-14-2009, 02:17 PM

Try your EK9 ecu and see if your getting the same problem. If you are swap out the dizzy for your ek9 one. It could be the ICM in the dizzy thats bad so thats why your not getting spark.

330conor · 06-14-2009, 09:50 PM

the teg was running perfect when i got it apart form the back left wheel being behind the driver seat!!..mayb it is the ecu ill try it

Tom251 · 06-14-2009, 09:58 PM

Was the engine/ECU from a UK car? If so, then the ECU is noo good as its coded to the key.

You need a JDM DC2 ECU.

civicduty_ · 06-15-2009, 11:36 PM

It is good you can disable the immobilizer system.

civicduty_ · 06-29-2009, 03:25 AM

Any updates?

06-13-2009, 10:59 PM	#1 (permalink)
330conor EK9.org Newbie Join Date: Jun 2009 Posts: 4	ek9 engine conversion hi there lads i have just completed an engine conversion on my ek9..the car was originally a 97' civic type r and now have replaced engine with a 98' integra engine...put the civic loom on the engine because of the way the ecu is but dont seem to be getting a fuel pump..so i wired the fuel pump to a switch and cranked it over but its not sparking?? has anyone experienced this problem before??

06-13-2009, 11:18 PM	#2 (permalink)
civicduty_ EK9.org Fan Join Date: May 2008 Posts: 169	Re: ek9 engine conversion Well I know the Integra ECM after a certain year came out with an immobilizer system that needs to detect the chip within the key as a theft deterrent. However it can be disabled. This might be shitting the stick with your swap. I hope this helps any. __________________

06-14-2009, 02:17 PM	#3 (permalink)
Accessory Zone EK9.org Addict! Join Date: Jul 2007 Location: Central Scotland Posts: 858	Re: ek9 engine conversion Try your EK9 ecu and see if your getting the same problem. If you are swap out the dizzy for your ek9 one. It could be the ICM in the dizzy thats bad so thats why your not getting spark. __________________ Dont forget your EK9.org member discount when you visit our site. Just put ek9 in the coupon area at check out. Accessory Zone

06-14-2009, 09:50 PM	#4 (permalink)
330conor EK9.org Newbie Join Date: Jun 2009 Posts: 4	Re: ek9 engine conversion the teg was running perfect when i got it apart form the back left wheel being behind the driver seat!!..mayb it is the ecu ill try it

06-14-2009, 09:58 PM	#5 (permalink)
Tom251 EK9.org Fan Join Date: Apr 2009 Posts: 106	Re: ek9 engine conversion Was the engine/ECU from a UK car? If so, then the ECU is noo good as its coded to the key. You need a JDM DC2 ECU. __________________ www.mcr-vtec.co.uk

06-15-2009, 11:36 PM	#6 (permalink)
civicduty_ EK9.org Fan Join Date: May 2008 Posts: 169	Re: ek9 engine conversion It is good you can disable the immobilizer system. __________________

06-29-2009, 03:25 AM	#7 (permalink)
civicduty_ EK9.org Fan Join Date: May 2008 Posts: 169	Re: ek9 engine conversion Any updates? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine conversion wiring	dave benson	Engine	24	07-28-2009 08:57 AM
ITR B18C6 Complete Engine Conversion	mikecrxsir	For Sale	10	07-07-2009 07:48 AM
engine conversion	lead_foot	Engine	5	05-15-2009 11:14 AM
please help!! engine conversion	burkey0013	Engine	5	01-26-2009 07:03 PM
B16B ENGINE/BOX/SHAFTS for conversion	forestfighter	Want To Buy	11	11-10-2008 09:15 PM