NeilVtec EK4 Build up

[NeilVtec]

Thought i hadnt got one on here so it was about time i had!! not sure if the is an actual build up section but i couldnt see one so ive put it in here!!!

the honda thing started when this happend

And now the LONG story starts lol il try and be breif...ish
After making a mess of the clio i purchased a EK3 fully standard and started work

then i swapped the old OZ super T's off the clio for £350 & theese rover wheels sprayed black


Then my mate was selling some bits off his civic cheap so it was then lowered 50mm on springs, carbon bonnet, and a twinloop exhaust

then for a short while i had some jdm y0 red lip steelys (winter wheels lol)

then i got a type R lip kit shortly before purchasing some Rota slip streams in flat black 15"

then sprayed the lips matt finish to match the new wheels

then i got some Tein superstreeet coilovers which are the best thing ive ever bought!


(thats not me ) lol
and then some spoon brace-age


then i got some new eassa LCA's and a lower tie baR

[NeilVtec]

then one day driving around i saw a Vti for sale.. went to enquire just out of interest and i was amazed to find out he only wanted £2k for it so naturally i bit his arm off and went back the next day with the money
so out with the old

temporarily having 2 civics was badass

unfortunately i didnt get any standard photos of it as it was time to switch everything over!
suspention in after some siezzed bolts!

all changed over


Then i made a new photoshop and fell in love... so tried to replicate it!

and the buying begins for thsi one by this point ive bought a spoon N1 and drop in filter and wind deflectors but forgot to take any pics






so that left me with new wheels, some bracing for the rear, and a spare cam cover to do something with at a later date
leavng me looking like this!

then i purchased a second hand DC sports 4-1 manifold and cleaned it up a bit!

[NeilVtec]

at somepoint it had had the little bits on the bumper sprayed over silver so i "blackified" them again!

then i found a way of mounting the stock strut brace alongside the spoon one ..just for fun lol


and that old red rocker cover from earlier... got turned into this on one bored weekend!
complimented by new washers in the corner off an ITR and a new oil cap i got for free of a mate

then i decided to remove the top resonator box for a "spoon direct airflow pipe" but as theese are £150.. i knocked one up from an old induction kit i had lying around!
the inspiration

[NeilVtec]

Resonator Out

Donar pipe

New pipe on


then thought id get some OEM fogs with amber lenses... was tense cutting the bumper! lol








DONE lol was fiddly but worth it in the end
Then i got some new spark plug leads and my ASR rear brace and ITR 22mm arb rear set-up arrived

[NeilVtec]

New asr bits
old tackle off


new stuff going on




And finally after theese were missing when the kit turned up... they arrived and the ARB went on





While doin this i was pissed to find out taht my LCA bushes were well..... ****ed

:S </3
But that brings me upto do date.. i curently have some new function 7 LCA's on the way and a exedy cluctch & flywheel kit . a new tien rear upper brace as mine is pants and a little dampachi doll (doesnt make it faster but it makes it cuter) lol
and this is lying in the garage waiting for me to put it all on

[NeilVtec]

M-fACTORY H-brace

short shifter

goodridge braided lines

TODA cambelt


Will be more updates shortly when im botherd to fit the stuff ive got or new stuff arrives …..ok new stuff arrived first .. got some function 7 LCA’s to replace my knackered ones.


The old crap

new ones going in



Still yet to get pics of it sat on the floor!

Got a exedy single hyper clutch & flywheel kit aswell just turned up but im selling it to fund a new plan if anyones after a brand spanking new clutch & Flywheel that can handle loadssss of power lol
ANYWAYS… after the biggest post ever… the should be more updates shortly.  infact.. rite now pics have just gone on photobucket!
I had to buy some ek9 rails and re-drill the mounting wholes but after a bit of fighting got this brand new EVO8 seat in... uber comfy & Supportive!



this is how it stands atm (seats not in this pic)


THE END... for now lol

[dazek9]

really nice

[b16 mini]

nice job! engine bay looks nice and clean

[Eskay]

clean

[muldo]

Very good rite up mate looks well smart.
Where did u get ur clutch n flywheel from?

[blinx9900]

awesome thread moved to "projects" section of the resource area

[Vtec6000]

Very nice, good work mate

[ek9ant]

looks really good wish i had the paitence to do all that!

[rvm]

awesome build up! thanks for sharing!

[NeilVtec]

Originally Posted by muldo

Very good rite up mate looks well smart.
Where did u get ur clutch n flywheel from?

Vtec Direct... ive pm'd you as im selling it still brand new for alot less due to a change of plans a being desperate for money


Cheers for all the comments! should have some mroe updates soon hoepfully