Brake master cylinder stopper

Splat · 12-30-2008, 02:25 AM

I looked around and found only one topic on this, but it did not answer the question i was looking for.
I know cusco makes a Brake master cylinder stopper for the JDM cars, Now these cars are all RHD, but does anyone know where i can get a LHD Brake master cylinder stopper, because the JDM one wont work on the U.S cars.

moon* · 12-30-2008, 03:43 AM

hey guy; cant help much; but have u seen the brake stopper in person b4??

i jst got my hands on 1; but its the for JDM version

i m not sure if u can turn in the other way round; n put the stopper direction upsidedown.;

from wat i see here; the measurements where the pin is located seems to be in the middle; u got any frens using 1? to see if u can swap it around? the JDM ones?

blinx9900 · 12-30-2008, 05:39 AM

It will not work, he needs one for a USDM car.

RagingAngel · 12-31-2008, 07:28 AM

The cusco one does work.

It just needs to be cut a little bit.

Otherwise, LHT made one and they probably still produce one. I prefer the design of the Cusco DC2 one since it bolts to the upper camber arm bolts, instead of the side of the shock tower.

Or do what some do and make your own.

RagingAngel · 12-31-2008, 07:57 AM

Errr...I take that back...well some of it.

The Cusco one does work ...on a DC2.

the EK9, you'll have to contact LHT or just get the carbing integrated one.

Or rather:
Lightning Motorsports - Golden Eagle Master Cylinder Brace 92-00 Civic - GBB100

DriveRaceBrace

blinx9900 · 12-31-2008, 10:09 AM

I want one that mounts to the shock mounting points

moon* · 01-23-2009, 03:20 AM

here the vid of the firewall flexing. i utubed it from the link given by raging angel

12-30-2008, 02:25 AM	#1 (permalink)
Splat EK9.org Fan Join Date: Dec 2008 Location: N.Y. Posts: 203	Brake master cylinder stopper I looked around and found only one topic on this, but it did not answer the question i was looking for. I know cusco makes a Brake master cylinder stopper for the JDM cars, Now these cars are all RHD, but does anyone know where i can get a LHD Brake master cylinder stopper, because the JDM one wont work on the U.S cars.

12-30-2008, 03:43 AM	#2 (permalink)
moon* EK9.org Fan Join Date: Mar 2008 Posts: 249	Re: Brake master cylinder stopper hey guy; cant help much; but have u seen the brake stopper in person b4?? i jst got my hands on 1; but its the for JDM version i m not sure if u can turn in the other way round; n put the stopper direction upsidedown.; from wat i see here; the measurements where the pin is located seems to be in the middle; u got any frens using 1? to see if u can swap it around? the JDM ones?

12-30-2008, 05:39 AM	#3 (permalink)
blinx9900 333whp 259wtq :) Join Date: Dec 2006 Location: socal usa Posts: 10,646	Re: Brake master cylinder stopper It will not work, he needs one for a USDM car. __________________ I no longer have the time to read every thread. PM me a link to yours if you would like my input and be sure to read the stickies also, there is a wealth of information there

12-31-2008, 07:28 AM	#4 (permalink)
RagingAngel 本田 Gearing Authority Join Date: Mar 2008 Location: Hong Kong Posts: 2,078	Re: Brake master cylinder stopper The cusco one does work. It just needs to be cut a little bit. Otherwise, LHT made one and they probably still produce one. I prefer the design of the Cusco DC2 one since it bolts to the upper camber arm bolts, instead of the side of the shock tower. Or do what some do and make your own.

12-31-2008, 07:57 AM	#5 (permalink)
RagingAngel 本田 Gearing Authority Join Date: Mar 2008 Location: Hong Kong Posts: 2,078	Re: Brake master cylinder stopper Errr...I take that back...well some of it. The Cusco one does work ...on a DC2. the EK9, you'll have to contact LHT or just get the carbing integrated one. Or rather: Lightning Motorsports - Golden Eagle Master Cylinder Brace 92-00 Civic - GBB100 DriveRaceBrace Last edited by RagingAngel; 12-31-2008 at 08:06 AM.

12-31-2008, 10:09 AM	#6 (permalink)
blinx9900 333whp 259wtq :) Join Date: Dec 2006 Location: socal usa Posts: 10,646	Re: Brake master cylinder stopper I want one that mounts to the shock mounting points __________________ I no longer have the time to read every thread. PM me a link to yours if you would like my input and be sure to read the stickies also, there is a wealth of information there

01-23-2009, 03:20 AM	#7 (permalink)
moon* EK9.org Fan Join Date: Mar 2008 Posts: 249	Re: Brake master cylinder stopper here the vid of the firewall flexing. i utubed it from the link given by raging angel

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake master cylinder stopper	Anto-EK9	Brakes	17	02-05-2010 08:03 PM
Master Cylinder Brace GROUP BUY!! £23 posted	Tegiwa Imports	Group Buys	82	12-15-2009 07:40 PM
fitting brake master cylinder	iceman	Brakes	5	06-24-2008 05:25 PM
clutch master cylinder	BigWhite	Want To Buy	0	05-11-2008 11:11 AM
what size brake master cylinder on stock ek9	blinx9900	Brakes	10	03-22-2007 09:42 AM