282mm on EJ9...

DJ Left · 02-07-2010, 12:42 PM

Hi i bought 282mm 4x100 Discs for my EJ9 and EBC Brake Pads. I Want to ask you. I want to keep my EJ9 Calipers, it's the 98 Model with 262mm Discs. Is this possible?? Or i want ITR calipers to fit the discs??

DJ Left · 02-07-2010, 12:43 PM

oh i forgot the discs, it's from MG ZS

DJ Left · 02-07-2010, 01:02 PM

noone??

Vtec6000 · 02-07-2010, 01:30 PM

Think you might need prelude calipers

DJ Left · 02-07-2010, 01:34 PM

oh i guess i can't fit 282mm discs with my stock calipers...

Vtec6000 · 02-07-2010, 03:10 PM

Quote:

Originally Posted by DJ Left

oh i guess i can't fit 282mm discs with my stock calipers...

I'm not sure... I think you need the caliper carrier and caliper itself.

ash-EK4 · 02-07-2010, 04:36 PM

You need either

prelude

legend twin pot

or rover 820 turbo calipers

darek · 02-08-2010, 05:16 PM

Also brake master cylinder and servo might be needed.

Daveracing · 02-17-2010, 11:41 PM

You need either the mg zr 160 or zs 180 discs calipers and carriers.(These are a DIRECT fit) If you go with the civic mb6 setup the only difference is the disc is 2 mm deeper so will need 2mm milling of the carrier to make the disc central.
I have also found the rover 600 series calipers AND carriers are the same with 280mm front discs.

02-07-2010, 12:42 PM	#1 (permalink)
DJ Left EK9.org Newbie Join Date: Dec 2009 Location: Greece Posts: 7	282mm on EJ9... Hi i bought 282mm 4x100 Discs for my EJ9 and EBC Brake Pads. I Want to ask you. I want to keep my EJ9 Calipers, it's the 98 Model with 262mm Discs. Is this possible?? Or i want ITR calipers to fit the discs??

02-07-2010, 12:43 PM	#2 (permalink)
DJ Left EK9.org Newbie Join Date: Dec 2009 Location: Greece Posts: 7	Re: 282mm on EJ9... oh i forgot the discs, it's from MG ZS

02-07-2010, 01:02 PM	#3 (permalink)
DJ Left EK9.org Newbie Join Date: Dec 2009 Location: Greece Posts: 7	Re: 282mm on EJ9... noone??

02-07-2010, 01:30 PM	#4 (permalink)
Vtec6000 Moderator Join Date: Jun 2007 Location: Ireland Posts: 3,483	Re: 282mm on EJ9... Think you might need prelude calipers

02-07-2010, 01:34 PM	#5 (permalink)
DJ Left EK9.org Newbie Join Date: Dec 2009 Location: Greece Posts: 7	Re: 282mm on EJ9... oh i guess i can't fit 282mm discs with my stock calipers...

02-07-2010, 04:36 PM	#7 (permalink)
ash-EK4 EK9.org Addict! Join Date: Sep 2008 Location: wareham, Dorset, UK Posts: 1,076	Re: 282mm on EJ9... You need either prelude legend twin pot or rover 820 turbo calipers

02-08-2010, 05:16 PM	#8 (permalink)
darek EK9.org Member Join Date: Jun 2009 Location: Cracow Posts: 78	Re: 282mm on EJ9... Also brake master cylinder and servo might be needed. __________________ --- --- http://krakow.mynight.pl/ 0_0

02-17-2010, 11:41 PM	#9 (permalink)
Daveracing EK9.org Newbie Join Date: Feb 2010 Location: Uk Posts: 16	Re: 282mm on EJ9... You need either the mg zr 160 or zs 180 discs calipers and carriers.(These are a DIRECT fit) If you go with the civic mb6 setup the only difference is the disc is 2 mm deeper so will need 2mm milling of the carrier to make the disc central. I have also found the rover 600 series calipers AND carriers are the same with 280mm front discs. Last edited by Daveracing; 02-20-2010 at 07:23 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
282mm brakes	David	Brakes	13	11-30-2009 02:58 PM
282mm Calipers (Front)	Bon87	Want To Buy	4	11-01-2009 08:13 PM
4x114.3 hubs with 282mm front and 262mm rear brakes	flybikeslee	For Sale	0	04-29-2009 11:33 AM
282mm calipers and carriers	mikecrxsir	Want To Buy	0	01-05-2009 09:50 AM
282mm Calipers & Carriers	Bon87	For Sale	7	11-02-2008 04:52 PM