Search results

Funny thing you say this. my car wouldnt start after i put fuel into it back when i had injector driver issues, bumping it start did. on the way back to my garage my horn didnt work, parked it up for a few weeks. 'borrowed' a workshop manual from work that said that both horn and brake lights...

bens polo saaaavage

its a single pin plug. the horn grounds itself against the chassis. quick google search come up with that image. not sure what horn i have but i have the most high pitched thing in the world. made sure my mate got me one like this hahah.

The rears are a different thing tho. i tried to see if part numbers matched but alot didnt. not evan the trailing arms are the same. they mount the same but are all different I do see honed development sell a slimmer nut that holds the rear hub bearing assembley and it converts 4x100 rears to...

262 factory disk EJ9, ej6 etc knuckles are the same, I did abit of research last week as i was bored, the bearing part number on ek9,dc2 96 spec and uk spec, mb6, 262 ej9,ek3,ek4 all have the same bearing part numbers which means the 5 stud hub bit goes into any of those. cheaper to go scrap...

Im not sure if these guys sell abrouad but youu can ask them. https://cpfuelandrace.com/ We run these in my ek9, have 1000cc injectors on my k24 turbo. They also sell injectors for all applications so hopefully they have something in there for you. Also you get warranty aswell

honda europe no longer available

I made my own lines using ptfe lines and ptfe fittings. maybe easier doing it that way?

Wire tuck always looks great. headlight tuck is great as thats the loom that you barely touch

U can use the same as an em1. the battery tray in the engine bay can hold an em1 battery even tho the ek9 one is slightly smaller. I use the same that would come in an em1. the battery tie down bits will all wortk the same as an oem ek9 battery

i was just listing which ones are behind. il take a pic or video on weekend showing where they go if someone hasnt done it by then

So from the top of my head 1. speaker plug 2. tweeter plug (blank , chilling behind door, unless you have tweeters which sit behind the mirror) 3. window switch 4. window regulater plug 5. wing mirror plug if im correct there is a plug there with a red clip. does it have 2 wires going to it...

Found an ek9 red carpet thats been cut for a cage similiar to mine. Thanks to Josh for collecting the part and bringing it to me at japfest another ek9 part that was missing from my ek9. Left to get is the carbon fascia centre on the dash (If cheap il buy it, but i could also hydrodip it) and...

Our stand is already packed out and the stand leader isnt adding any more cars to our stand for japfest classic

Im going go japan and japfest classic but im on the outcast crew stand for those. with mimms, they are not doing one at santa pod so there is no stand for those atm.

Santa pod is not allowing any outside people to do shows at pod anymore as they want to focus on their own shows. so no more MIMMS at pod. Mimms at pod is always a great one as sooo many hondas come. I went to the one mimms where it was at three sisters track and the turn out was about 1/8th...

We have JDM combe coming up on 20th july 2024 this is the annual ek9 meetup which we all do every year since 2020/2021 we have a stand aswell for all ek9 only. with the exception of a few who are members on ek9.org all information in this link below...

Its too late. no spaces left for cars on show. If this was done in advance we could sort something out for next year. I could see if @Dzero4 or myself can sort it out if we get enough numbers etc. Last EK9 stand if can remember at japfest was proabbly around 2015-2017. There was quite a few...

K sport 6 pot calipers 304mm

OEM plus. they do look good. i wish i could run them as wet wheels but my brakes are waay too big for them